Does Baking Soda Refresh A Carpet?

Did you know that baking soda is a key ingredient in DIY carpet cleaning solutions and procedures? The only difference from recipe to recipe is how the baking soda is applied to the surface. If the surface is greasy, one route will be taken. If it is not greasy, another route will be taken.

Continue reading to see just what you should do with your baking soda and your carpet. Can you refresh your carpet? Absolutely, and here’s how.

Greasy Stains w/Baking Soda

When we say greasy, we mean anything with oil in it. Oil can really outline a spot, and we all know what outlining can do. You guessed it! Attract more dirt.

Here’s how you remove greasy stains using baking soda:

1. Get a clean cloth or paper towel and press it into the stain to remove as much grease as possible. Be careful not to rub or scrub, as this will make the oils harder to remove.
2. Sprinkle a hefty amount of baking soda directly over the entire stain.
3. Be patient and wait a while; the longer, the better. We suggest opting for overnight, just be sure to block off the area from kids and animals for the time being. Remember, the longer the baking soda stays on the stain, the more oil it will absorb.
4. After a long wait, thoroughly vacuum the area and carefully inspect it. The stain should be all gone!

Non-Greasy Stains w/Baking Soda

When we say non-greasy, we mean something that doesn’t have an underlying residue. These stains are typically easier to fight.

Here’s how you remove non-greasy stains using baking soda:

1. Sprinkle a hefty amount of baking soda directly over the entire stain.
2. Moisten the area with a wet paper towel or washcloth. Make sure the water is hot. But  squeeze it out so that it’s damp and not dripping before you moisten the area.
3. Leave the wet paper towel or washcloth on top of the baking soda for at least three hours. If possible, leave it longer.
4. Remove the towel or cloth and vacuum the area. You may repeat the process if the stain is not fully removed.

Baking Soda for Everyday Carpet Cleaning

Baking soda is great for removing stains, but did you know that it’s also awesome for cleaning and refreshing your carpet in general? Use these general directions to get the job done:

1. Sprinkle baking soda lightly over the dry carpet. You can use heavier amounts on high-trafficking areas, like hallways and walkways.
2. Let the baking soda sit for at least 15 minutes. You can leave it on longer if you desire.
3. Vacuum the carpet as you normally would. Afterward, you’ll smell the refreshing scent of baking soda in the air. The cleanest feeling!

All of these options for cleaning your carpets are great. Keep them for future reference. But if you’d rather a professional take care of your cleaning, please look to Under the Rug Floor Care. Our professionals go through a vigorous cleaning process. Check out our steps below:

1. We begin by vacuuming thoroughly to extract as much dirt as possible.
2. Then, we apply a stain treatment to eliminate stains. This is followed by a deodorizer to get rid of any lingering odors that may be lurking around.
3. Once the applications are completed, we move on and apply a hot water rinse with several protectants to ensure your carpets stay stain and odor-free for a long time.
4. We end the process with an air treatment that ensures a fast dry. That way you can get back to your everyday living.

Call us today to get pricing and book our services at 619-567-1389.